· Home    · The Gallery    · Contact     · View Site Map                

 
Link Indicator
Link Indicator
Outline
Link Indicator
Cut-out Diagram
Link Indicator
3-View Drawings
Link Indicator
Chip Cotton's Skybolt
Link Indicator
Link Indicator
My Smoke System
Link Indicator
Link Indicator
Ribs Preparation
Link Indicator
Rib Templates
Link Indicator
Rib Templates Complete
Link Indicator
Wing Tip Bows
Link Indicator
Wing Tip Bows II
Link Indicator
Upper Ribs Complete
Link Indicator
Link Indicator
Lower Wing Rib Construct
Link Indicator
Spar Fabricating
Link Indicator
Drag Wire Blocks
Link Indicator
Right Wing I
Link Indicator
Right Wing II
Link Indicator
Drag Wire Drill Jig
Link Indicator
I-Strut Drill Jig
Link Indicator
Right Wing III
Link Indicator
Right Wing IV
Link Indicator
Right Wing V
Link Indicator
Right Wing VI
Link Indicator
Right Wing VII
Link Indicator
Right Wing VIII
Link Indicator
Right Wing VIIII
Link Indicator
Right Wing X
Link Indicator
Right Wing XI
Link Indicator
Right Wing XII
Link Indicator
Right Wing XIII
Link Indicator
Right Wing XIV
Link Indicator
Right Wing XV
Link Indicator
Right Wing XVI
Link Indicator
Right Wing Almost Done
Link Indicator
Right Wing Done!
Link Indicator
Link Indicator
Spar Fabricating
Link Indicator
Left Wing I
Link Indicator
Left Wing II
Link Indicator
Left Wing III
Link Indicator
Left Wing IV
Link Indicator
Left Wing V
Link Indicator
Left Wing VI
Link Indicator
Left Wing VII
Link Indicator
Left Wing VIII
Link Indicator
Left Wing VIIII
Link Indicator
Left Wing X
Link Indicator
Left Wing XI
Link Indicator
Left wing Done!
Link Indicator
Link Indicator
New Bench
Link Indicator
Splice Join Jig
Link Indicator
Spar Fabrication
Link Indicator
Upper Wing I
Link Indicator
Upper Wing II
Link Indicator
Upper Wing III
Link Indicator
Upper Wing IV
Link Indicator
Upper Wing V
Link Indicator
Upper Wing VI
Link Indicator
Upper Wing VII
Link Indicator
Upper Wing VIII
Link Indicator
Upper Wing IX
Link Indicator
Upper Wing X Done!
Link Indicator
Center Bay & More
Link Indicator
Topsy-Turvy
Link Indicator
Wing Finally Done!
Link Indicator
Link Indicator
Initial Wing Rigging
Link Indicator
Aileron Linkage & I-struts
Link Indicator
More I-struts
Link Indicator
The Welder from Hell
Link Indicator
Link Indicator
Aileron Templates
Link Indicator
Aileron Rib Construct
Link Indicator
Lower Aileron Build I
Link Indicator
Lower Aileron II
Link Indicator
Lower Aileron III
Link Indicator
Lower Aileron IV
Link Indicator
Lower Aileron V
Link Indicator
Lower Ailerons Done!
Link Indicator
Upper Aileron I
Link Indicator
Upper Aileron II
Link Indicator
Upper Aileron III
Link Indicator
Aileron Rib Anomaly
Link Indicator
Upper Aileron IV
Link Indicator
Upper Ailerons Done!
Link Indicator
Link Indicator
Instrument Panels
Link Indicator
More Panel Stuff
Link Indicator
Panels & Tank Painted!
Link Indicator
Throttle Quadrants & Harnesses
Link Indicator
Fitting Gauges
Link Indicator
Adding Shiny Stuff
Link Indicator
Smoke & Instruments
Link Indicator
Link Indicator
Seat Backs & Torque Tube
Link Indicator
Rudder Pedals
Link Indicator
Brakes
Link Indicator
Landing Gear Choices
Link Indicator
Starting Landing Gear
Link Indicator
Landing Gear Progress
Link Indicator
Landing Gear Ready For Tacking
Link Indicator
Gear. Heel Rails. Firewall
Link Indicator
Landing Gear Setting Toe
Link Indicator
Stuff & Landing Gear Done!
Link Indicator
Elbow Rests & Fuel Valve
Link Indicator
Smoke Tank & Fuel System
Link Indicator
Powdered Mount & Standoffs
Link Indicator
Stringers & Torque Tube
Link Indicator
Sheet Metal
Link Indicator
Sheet Metal & Turtle Deck
Link Indicator
Exhaust Ramp
Link Indicator
Upholstery
Link Indicator
Catching Up
Link Indicator
Link Indicator
Stabs Trims & Controls
Link Indicator
Stabs, Trim & Controls II
Link Indicator
Link Indicator
Powerplant
Link Indicator
Nosebowl & Exhaust
Link Indicator
Alternate Air Induction
Link Indicator
Link Indicator
2007 Recap
Link Indicator
2008 Recap
Link Indicator
To weld or not to weld..
Link Indicator
Skybolt Builders Manual
Link Indicator
Fuel Plumbing and...
Link Indicator
Lots of Stuff
Link Indicator
Link Indicator
Skydiving
Link Indicator
Web Design by Beej
Link Indicator
The TSA Sux...
Link Indicator
Visitors from the UK
Link Indicator
Biplane Expo 2008
Link Indicator
Biplane Expo Musings 2009
Link Indicator
Link Indicator
Link Indicator
Aviation Links
Link Indicator
My Favorite Homebuilt Story
Link Indicator
Link Indicator
How We Met
Link Indicator
The Visits
Link Indicator
Our Wedding Day
Link Indicator
About Us
Link Indicator
Oshkosh 2007 Musings
Link Indicator
Link Indicator
Canopy Redux
Link Indicator
Canopy II
Link Indicator
Link Indicator
Rudder Covering
Link Indicator
Link Indicator
Firewall Aft Work
Link Indicator
Instrument Panel Done
Link Indicator
Link Indicator
Link Indicator
 
short solo movie clip Latest Posts
1/26/2014
Alternate Air Induction
11/30/2013
Nosebowl & Exhaust
11/22/2013
Powerplant
8/15/2013
Instrument Panel Done
url for Newsreader:: http://www.65degrees.net/skybolt/rss.asp What's this?
Latest uploaded pic Random Pic
short solo movie clip Movies Clips
My truck pulling days [1.24mb]
First Solo [5.98mb]
Lauries Tandem [9mb]
Latest uploaded pic Random Qoute
It is one thing to be in the proximity of death, to know more or less what she is, and it is quite another thing to seek her. Ernest Hemingway


Right Wing V
5/22/2006

click for larger image
The angled aluminium as used in the aileron bay...

Aileron Bay

The aileron bay I felt had no adequate provision for incorporating a straight enough edge at the aileron rib tails. Therefore, I acquired some alum sheet, bent it in a break [see profile in pic], and it fits lovely...thus providing a solid straight edge for the fabric to wrap around when the time comes. The alum angle  was over-bent so as to force the fit of it to the rib tails, therefore keeping the alum flat .

Drag / Anti Drag Wires

After long deliberation, I decided not to purchase ready made stainless steel wires. Instead, I made my own from 4130 steel rod as per plans. It seems that using Bruntons stainless wires would be a needless cost - at least for me. I sprayed the wires with Randolph Epoxy primer.

The holes in the drag blocks were reamered out to allow for the extra paint thickness on the wires [ie. 3/16 hole +paint thickness] by using a 13/64  bit [similar deal for 1/4 wires too ]. A great way of sealing these holes is with a tobacco pipe-cleaner dipped in Clear-coat. Then I will die [dye?] the ends as per plans, which is right hand thread at the front spar and left hand thread at the rear. I suppose using opposite threads is extra security in the wires loosening...

I had been waiting it seemed forever for an 18 inch drill bit that I had needed in order to drill 1 x 3/16 hole in a drag block...this came about due to me prematurely gluing in place a certain rib that then got in the way of the drag block jig I had made...

The final top of Clear-coat was applied! Now I can get on with the tip bow...


Spraying epoxy primer on to the drag wires...
Spraying epoxy primer on to the drag wires...
Applying the final top coat of Clear-coat
Applying the final top coat of Clear-coat

Latest uploaded pic Latest Pics
11/30/2013
go to page entryExtending and repairing the nose bowl.....
11/22/2013
go to page entryOn arrival.....
Latest uploaded pic Progress Diagram
click to view large diagram
- Latest Stuff
RSS Feed Reader
- The Real News
RSS Feed Reader
 Local TX Weather
Georgetown Weather Advisory:
RSS Feed Reader
Fair and 95 F.
Winds: South at 10.
Pressure: ".
Humidity: 41%.
Heat Index: 100.
Updated: Aug 16 2017, 7:56 pm.
65degrees.net 2017. All rights Reserved. Web Design by 65degrees.net.
.